{"product_id":"xtool-f1-jigs-for-monarch-pine","title":"XTool F1 Jigs for Monarch Pine","description":"\u003cp\u003eDO NOT SELL THESE FILES. These are digital files: these are not physical products. \u003c\/p\u003e\n\u003cp\u003eThese SVG files were made as a courtesy for XTool F1 (original, not Ultra) users who wish to engrave Monarch Pine necklace blanks. We used a gantry laser and cut them out of masonite\/hardboard (thin, compressed wood material with a smooth side and a rough\/textured side) that can be found at any big box store. \u003c\/p\u003e\n\u003cp\u003eBlanks included: 8mm Disc, 10mm Disc, 25mm Disc, Horizontal Plain Bar, Vertical Cross (not men's version), Wide Rectangle, Oval, Dog Tag and Oval Bar Paperclip. A file for a baseplate is also included, and should be placed below each jig before use. Remove the metal baseplate from your F1, then insert the matching wood baseplate you made, then insert the jig. Happy lasering! \u003c\/p\u003e\n\u003cp\u003e***\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFree Necklace Engraving Fixture SVG Files – Disclaimer \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese SVG files are provided free of charge by BosonBerry Studios \"as is\" for personal and\/or commercial use (unless otherwise specified in the product listing). By downloading or using these files, you agree to the following terms: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eNo Warranty or Guarantee: These SVG files are offered without any warranty, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, accuracy, reliability, or non-infringement. BosonBerry Studios does not guarantee that the designs will perform as expected on your laser engraver, software, materials, or specific setup. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUser Responsibility for Settings and Adjustments: Laser engraving outcomes depend on numerous variables unique to your equipment and materials, such as machine type (fiber, CO2, diode), lens, power, speed, focus, passes, air assist, material composition\/thickness, and more. You are solely responsible for testing, calibrating, and optimizing these files for your own use. Specifically: - Kerf offset \/ beam compensation — Kerf width varies by laser, material, settings, and other factors. These files are provided without any pre-applied kerf compensation. You must measure your machine's kerf and apply the correct offset in your software (e.g., LightBurn, LaserGRBL, RDWorks, Glowforge, etc.) to ensure proper sizing, fit, engraving alignment, and depth. BosonBerry Studios is not responsible for any resulting issues, including misalignment, incorrect sizing, poor engraving quality, material waste, or rework. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTesting and Safety: Always run tests on scrap material first. Never leave your laser unattended while operating. Comply with all manufacturer safety instructions, including proper ventilation, protective eyewear, fire safety precautions, and checks for material toxicity (e.g., fumes from certain metals or coatings). BosonBerry Studios assumes no liability for any personal injury, property damage, health risks, fires, or other incidents related to the use of these files. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVariability in Results: Engraving quality on necklaces (e.g., contrast, depth, legibility, permanence) varies widely based on metal type\/alloy, surface finish, prep work, laser wavelength, and post-processing. No specific results are promised or guaranteed. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLimitation of Liability: To the maximum extent permitted by law, BosonBerry Studios and its owners shall not be liable for any direct, indirect, incidental, special, consequential, or punitive damages arising from the use, misuse, or inability to use these files—even if advised of the possibility of such damages. This includes (without limitation) lost time, ruined materials, damaged equipment, or lost profits. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNo Modification or Distribution: These files are provided for your direct personal or commercial use only (to create finished engraved products). You may not modify, alter, adapt, reverse-engineer, or create derivative works from these files. You may not share, distribute, upload, sell, or otherwise make these files (original or modified) available to any third party in any form, whether free or paid. If you do not accept these terms, please do not download or use the files. \u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eThanks for grabbing these free necklace engraving fixtures from BosonBerry Studios—have fun lasering, experiment safely, and tag us if you make something cool!\u003c\/span\u003e\u003c\/p\u003e","brand":"BosonBerry Studios","offers":[{"title":"Default Title","offer_id":43047021838397,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/9403\/1421\/files\/MPjigs-jiginF1.png?v=1773791399","url":"https:\/\/shop.bosonberry.com\/products\/xtool-f1-jigs-for-monarch-pine","provider":"BosonBerry Studios","version":"1.0","type":"link"}